This little device is super cool. It takes 5VDC from a USB, and gives you both analog and digital in/out. It’s like an Arduino, but wi-fi connected, cloud-manageable, and API-interactable. All in this tiny little package… did I mention that you configure it without ever connecting anything USB except for power? Even on a WPA-passworded wifi network?
So the first thing I did (over lunch at EmberConf) was to make der blinkenlights: syncing the Core with the network, claiming it with the cloud web admin tools, and writing and uploading a program ALL WITHOUT EVER TOUCHING THE CORE. Seriously, this is cool. Painfully cool.
Anyway, it sat for the past few weeks until I thought of a project to do with it.
I’ve had a Morning Industry deadbolt on one of my doors for a while now. It’s great when I rent my place on Airbnb, because I can have a guest choose a code before they come and they won’t need a key.
Last weekend I was doing a spring cleaning and I found an old RF remote that I bought with the lock: one of these little guys that looks like a keychain garage remote:
It can be paired with the deadbolt to lock and unlock it from the remote. That’s not useful to me, so I figured I could h4x0r this remote, connect it to a Spark Core, and use it to lock and unlock the door from a computer, phone, or tablet. Yep!
My friend and fellow Hacklabber Alex is a far more accomplished home automation hacker than I am. He has similar locks and can control them over Insteon. He uses a Morning Industry device that does the same thing I wanted to do. (I admire a company who will release a product that is basically a total hack.) Alex let me pop off the cover on the remote to figure out which switch connections did what:
… so I soldered the same number of wires to the same places on my own remote, choosing different colours so it would be easier to follow:
Then I came home and quickly figured out that I didn’t need all of those wires. (I didn’t need the green or the blue wire: turns out they were there because Morning’s solution to controlling two buttons was to have each button connected to its own Insteon bridge.) To power the remote, I needed to connect red to a +5VDC source and black to ground. If I supply current to the orange and yellow wires (even the 3.3V out on the spark’s digital pins is fine), it’s like pressing the button on the remote.
Since I wanted to do this on a prototyping board and not have lots of wires, I stopped by Creatron, our local nerdshop, and grabbed a both USB port and a barrel connector that I could use to power it. (I have them both on the board in the photo, but I’m only using the USB now because that’s the cable I have handy.)
How to do it
So now I have everything I need:
- Spark Core
- Prototyping board
- Prototyping-mountable USB port (or barrel connector; your choice, but not both if you wire it up the way I have!)
- Morning Industry RF remote with wires soldered as pictured above (green/blue unnecessary)
- Wire for patching
What I did:
- Place the Spark in the centre of the bread board so all of its pins are in one of the center rows.
- Get power to the board, Option A: Place the barrel connector into the side rails for + and – power (taking care to match up the + and – on the board and on the connector).
- Get Power to the board, Option B: place the USB port into four of the centre rows that are NOT shared with the Spark Core. Connect a short red wire from the USB pin labelled VBUS (or +5V or something) to the + row in the power rail, and a short black wire from the USB pin labelled GND to the – row in the power rail. (Or if you have a USB connector that lets you connect directly to the +/- power rails, do that.)
- Connect the red wire from the remote into the + power rail.
- Connect the black wire from the remote into the – power rail.
- Connect the VIN port on the Spark Core to the + power rail with a red wire.
- Connect the GND port on the Spark Core to the – power rail with a red wire.
- Connect the orange wire from the remote to port D2 on the Core.
- Connect the yellow wire from the remote to port D3 on the Core.
- Double-check your connections. Here’s my picture again. I think the colours should make it clear. Remember, you only need the USB port OR the barrel connector, not both.
All in all, a fun, fast little project.
I really like this little Core. A remotely-manageable, wifi-connected computer with digital and analog in/out pins? For that price… wow. I see more projects (and more Cores) in my future.